Configuring the Certificates for the Jamf SCCM Plug-in 3.40 or Later

There are one or more certificates that must be configured before you install the Jamf SCCM Plug-in 3.40 or later. The required certificates and the servers on which they must exist vary depending on the certificate authority (CA) used. Use the tables below to determine which type of CA is appropriate for your environment.

The following table shows the protocols supported by the management point in SCCM 2012 based on the type of CA used:

Certificate AuthorityHTTPHTTPS
Self-signed certificate
Standalone CA
Enterprise CA using template

The following table shows the hash algorithms supported by SCCM 2012 based on the type of CA used:

Certificate AuthoritySHA-2
Self-signed certificate
Standalone CA
Enterprise CA using template✔ (Jamf SCCM Plug-in 3.60.0 or later)

Once you have chosen a CA type, you must install and configure the required certificates. To view the procedure for configuring certificates from the CA you selected, see one of the following articles: